Exteris Stressgard 2026 03 22

Which target pest is specifically listed for treatment with Exteris Stressgard 2026 03 22?

• Red Thread (Laetisaria fuciformis) ✓
• Brown Patch (Rhizoctonia solani)
• Dollar Spot (Clarireedia minuta)
• Pythium Blight (Pythium spp.)

Answer: The label facts identify Red Thread (Laetisaria fuciformis) as the target pest.

🔗 Source

What instruction is provided regarding the prescribed application rates?

• Always use the maximum rate for best results
• Do not exceed maximum prescribed rates ✓
• Rates must be doubled if disease pressure is high
• Rates should be adjusted based on tank capacity

Answer: The restrictions section explicitly states: 'DO NOT exceed maximum prescribed rates.'

🔗 Source

If a technician is using a 25 Gallon spray tank with a spray volume of 1 Gal per 1,000 ft2, how much product should be used per 1,000 ft2?

• 15 fl oz
• 25 fl oz
• 37.5 fl oz
• 75 fl oz ✓

Answer: For a 25 Gallon tank with a 1 Gal per 1,000 ft2 spray volume, the mixing notes specify 75 fl oz per 1,000 ft2.

🔗 Source

Which of the following is a listed application rate (fl oz product/ 1000 ft2) for Red Thread?

• 0.5
• 1.5 ✓
• 10.0
• 15.0

Answer: The application rates listed for Red Thread include 1.5 fl oz product/ 1000 ft2.

🔗 Source

What is one of the specific container restrictions listed on the label?

• Containers must be stored in a temperature-controlled room
• Do not reuse or refill this non-refillable container ✓
• Containers must be triple-rinsed before disposal
• Do not store containers near food or feed

Answer: The label restrictions state: 'Non-refillable container. DO NOT reuse or refill this container.'

🔗 Source

Under what condition should a technician use the higher application rate for Red Thread?

• When soil temperatures are above 85°F
• When using a 5 Gallon spray volume
• Under high disease pressure or for early curative application ✓
• When applying in the fall

Answer: The timing/weather section states to use the higher rate under high disease pressure or for early curative application.

🔗 Source

A technician is using a 100 Gallon spray tank and needs a spray volume of 3 Gallons per 1,000 ft2. How much product is required per 1,000 ft2?

• 150 fl oz
• 100 fl oz ✓
• 75 fl oz
• 60 fl oz

Answer: For a 100 Gallon tank with a 3 Gal per 1,000 ft2 spray volume, the mixing notes specify 100 fl oz per 1,000 ft2.

🔗 Source

According to the label, when should preventative fungicide applications begin in the fall?

• When soil temperatures drop below 65°F at a 2-inch depth
• When soil temperatures drop below 75°F at a 2-inch depth ✓
• When air temperatures drop below 75°F
• When soil temperatures drop below 85°F at a 4-inch depth

Answer: The label states to begin preventative applications in the fall when soil temperatures drop below 75°F at a 2-inch soil depth.

🔗 Source