Oximycin P5

When applying Oximycin P5 to control algae, what are the recommended environmental conditions?

• Late evening under cloudy conditions
• Early in the day under calm, sunny conditions when water temperatures are warm ✓
• During windy periods to ensure aeration
• In heavy rain to aid in dilution

Answer: Timing and weather conditions: Apply early in the day under calm, sunny conditions when water temperatures are warm.

🔗 Source

According to the label, what are the active ingredients in Oximycin P5?

• Hydrogen Peroxide and Peroxyacetic Acid ✓
• Hydrogen Peroxide and Sodium Percarbonate
• Peroxyacetic Acid and Sodium Hypochlorite
• Oxygen and Peroxyacetic Acid

Answer: It contains 26.5% Hydrogen Peroxide and 4.9% Peroxyacetic Acid as active ingredients.

🔗 Source

Which of the following sets of Personal Protective Equipment (PPE) is required when handling Oximycin P5?

• Chemical-resistant gloves, goggles or face shield, long-sleeved shirt, long pants, and chemical-resistant footwear ✓
• N95 mask, chemical-resistant gloves, goggles, and rubber boots
• Chemical-resistant suit, gloves, goggles, and long pants
• Long-sleeved shirt, long pants, and chemical-resistant footwear only

Answer: Technicians must wear protective eyewear (goggles or face shield), chemical-resistant gloves, long-sleeved shirts, long pants, and chemical-resistant footwear.

🔗 Source

What is the Reentry Interval (REI) for Oximycin P5 when used with non-spraying methods in enclosed environments like greenhouses?

• 1 hour
• 4 hours
• 0 hours ✓
• 12 hours

Answer: REI: 1 hour for fogging/spraying in enclosed environments; 0 hours for non-spraying in enclosed environments.

🔗 Source

Under what circumstances should the application rate be increased?

• When water temperatures are low
• When applying to ornamental pools only
• When existing algae density is high and when dealing with resistant algae types ✓
• When applying in windy conditions

Answer: Application rates and targets: notes: Apply at higher rates when existing algae density is high and when dealing with resistant algae types.

🔗 Source

When should an applicator wait before adding other products to the water after using Oximycin P5?

• 24 hours
• 48 hours ✓
• 72 hours
• 1 week

Answer: Timing and weather conditions: Wait 48 hours before adding other products after application.

🔗 Source

What is the instruction regarding effluent containing this product being discharged into sewers?

• Do not discharge effluent under any circumstances
• Only discharge during calm weather conditions
• Do not discharge effluent containing this product into sewers without notifying the local sewage treatment plant ✓
• Effluent must be diluted with 10 gallons of water first

Answer: Use restrictions: Do not discharge effluent containing this product into sewers without notifying the local sewage treatment plant.

🔗 Source

According to the product description, how should Oximycin P5 be mixed for application in irrigation/chemical tanks?

• Mix only with water ✓
• Mix with water and a surfactant
• Mix with water and a wetting agent
• Dilute with 1:1 ratio of water and acid

Answer: Mix only with water.

🔗 Source