SaniDate 12.0 California

Which of the following organisms is SaniDate 12.0 California specifically designed to control?

• Bacteria, fungi, algae, and slime-forming organisms ✓
• Rodents, insects, and arachnids
• Viruses and parasitic worms only
• Only bacteria and fungi

Answer: The label states the product is designed to control bacteria, fungi, algae, and slime-forming organisms.

🔗 Source

What must a technician do before mixing the product into water that contains low levels of organic or inorganic matters?

• Rinse thoroughly with clean water ✓
• Add more concentrate to compensate
• Increase the dosage by 50%
• Only use in outdoor settings

Answer: The restrictions state: 'Do not use in water containing low levels of organic or inorganic matters; rinse thoroughly with clean water before mixing.'

🔗 Source

Which of the following is a stated restriction regarding the use of SaniDate 12.0 California?

• Do not use in concentrated form ✓
• Do not use in any food processing plants
• Do not use for algae control
• Do not use in potable water

Answer: The restrictions section explicitly states: 'Do not use in concentrated form.'

🔗 Source

According to the label, where can SaniDate 12.0 California be applied?

• Both indoor and outdoor locations ✓
• Indoor food processing environments only
• Outdoor irrigation systems only
• Only in greenhouse watering systems

Answer: The label indicates applications for irrigation systems (outdoor/water sources) and food contact surfaces (indoor/processing plants), covering both locations.

🔗 Source

When using the product for algae/fungi control in irrigation, what is the correct dosage per 1,000 gallons of water?

• 6.45-25.6 fl. oz. ✓
• 1.00-15.00 fl. oz.
• 4.0 oz.
• 1:226 to 1:1,000

Answer: The mixing notes specify that for algae/fungi control in irrigation, use 6.45-25.6 fl. oz. per 1,000 gallons.

🔗 Source

When treating 1,000 gallons of irrigation water to suppress or control bacteria, what is the required amount of SaniDate 12.0 California?

• 1.00-15.00 fl. oz. ✓
• 4.0 oz.
• 6.45-25.6 fl. oz.
• 1.00-25.6 fl. oz.

Answer: For irrigation water to suppress/control bacteria, the label specifies using 1.00-15.00 fl. oz. per 1,000 gallons.

🔗 Source

If a technician is applying the product via spray, what specific respiratory protection is required?

• A NIOSH-approved respirator with organic vapor (OV) cartridges and a combination HE filter ✓
• A standard N95 dust mask
• A NIOSH-approved respirator with only a particulate filter
• A full-face mask with no cartridges

Answer: The PPE section states that if spraying, use a NIOSH-approved respirator with organic vapor (OV) cartridges and a combination HE filter.

🔗 Source

What is the required Preharvest Interval (PHI) for this product?

• pH = Zero (0) Days ✓
• pH = 1 Day
• pH = 7 Days
• pH = 14 Days

Answer: The timing/weather section explicitly states the Preharvest interval is pH = Zero (0) Days.

🔗 Source